Nitrous Automatic Pressure/Temperature Controlled Heater Adjustable from 900psi to 1050psi - AF49-1076
Aeroflow Nitrous Automatic Pressure/Temperature Controlled Heater
Adjustable from 900psi to 1050psi
To get peak performance from your nitrous oxide system it's a well-known fact that the nitrous bottle pressure plays the most important role to having a constant tune. If your bottle pressure is too low, it will be too rich and too much bottle pressure, you may be getting into a lean tune up. This can cause the solenoids to not activate or worst case you run into the safety issues with the bottle.
The Aeroflow Performance automatic pressure-controlled heater is the perfect companion to your nitrous bottle. It will keep your bottle at the perfect pressure all while switching the heater on/off with the included pressure sensor so you can set and forget. It will accurately control the bottle pressure, since it is controlled by internal bottle pressure; not bottle temperature. The heater starts to work when the bottle pressure drops below 900psi and stops at approximately 1050psi. This complete kit is designed to suit a -4AN nitrous line with an inline gauge port and comes with the blanket, pressure switch, relay and wiring kit.
- This heater may be hot during and post operation. The surface heats quickly and cools down slowly. Burns may result from touching the heater surface.
- Keep away from water and external fluids.
- Do not clean with any solvents.
To protect against personal injury or equipment damage all nitrous bottle warmers must be used with a functioning pressure relief valve in conjunction with a pressure gauge and automatic heater shut off valve.