Products

H Series Conrod Bearing Set STD With .001" Xtra Clearance Suit SB L/J Chev 262-400 & LS Series H-Series Bearings These bearings are iden...

H Series Main Bearing Set .010" Suit SB Chev L/J 262-400 H-Series Bearings These bearings are identified by a letter H in the part number su...

H Series Main Bearing Set STD Suit Chev LS Series 97-On H-Series Bearings These bearings are identified by a letter H in the part number su...

Elite 750 ECU + Plug and Pin Set  Includes: Elite 750 ECU Plug and Pin set to suit ECU OVERVIEW The Elite 750 is an entry-level ECU offering many ...

Rotary Trim Module Used to trim functions within software based on switch position HT-010504

3 Bar Motorsport MAP Sensor Used to measure Intake Manifold Pressure on Boosted engines up to 2bar boost pressure Includes: Matching male Deu...

Boost Control Solenoid 3 Port 1/8th - 33Hz (inc hose fittings, NPT rubber isolated mount and matching DTM 2 plug and pins set) - Used to cont...

Haltech CAN Ada Cable DTM-4 F to 8 pin Black Tyco 75mm (3") Suits: Used to adapt a Platinum series ECU to Elite DTM-4 CAN system. HT-130040

CAN Adaptor Loom DTM-4 to 6-pin Circular Connector Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder,...

CAN Adaptor Loom DTM-4 to Flying Leads Suits: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connecto...

CAN Adaptor Loom DTM-4 to JST 5-pin Suits: Haltech IC-7 Dash, WBC 1, WBC 2 and Link Plug-in ECUs Includes: 1 x CAN Adaptor Loom (DTM-4 t...

CAN Adaptor Loom DTM-4 to Minifit Jr Suits: Haltech iC-7 and Microtech ECUs Includes: 1 x HT-130049 Can Adaptor Loom Notes: Use with ...

KEYPAD OVERVIEW With soft touch, ergonomically designed buttons, the Haltech CAN Keypad is easy to use and simple to configure. The Haltech CAN Ke...

Haltech CAN Keypad 8 button (2x4) Suits: NEXUS and Elite devices only Includes: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM-4,...

Coolant Temp Sensor - Small Thread M12 x 1.5 (Inc Delphi plug & pins) Used to measure Coolant Temperature, 127 deg C (260F) Max Reading HT...

Dual Switch Panel Only Includes: Dual panel and yellow adjustment knob. Notes: 12 Position Rotary Trim Modules are NOT included, Please order...

Elite 2500 ECU Outputs: Up to 8 injector and 8 ignition.Suits: Universal 1-12 cylinder or 2-4 rotor applications.Includes: Elite ...

HARNESS OVERVIEW Ideal for dedicated race cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at ...

Suits: For use with up to three CAN devices. Includes: Elite 4 Port CAN hub and Elite CAN cable DTM-4 to DTM-4 - 300mm (12") Notes: Direct Pl...

Flex Fuel Composition Sensor - Suit 3/8 "GM Spring Lock" fittings (inc plug & pins) Used to measure Ethanol content HT-011000

Harness Sleeve Pack Includes: Nylon Sleeve 6mm x 10m 8mm x 5m 14mm x 2m 25mm x 1m Heatshrink glue lined 8mm x 1.2m 12mm x 0.6m 19mm x 0.3m 35mm ...

Haltech HC5 - Hydraulic Crimper Suits: 00 AWG to 12AWG cable. Includes: 1 x Hydraulic crimping tool. Rated to 5 Ton. 8 x Die Sets - (Sizes 4,...

Haltech iC-7 Colour Display Dash Size: 7in DASH OVERVIEW With a crisp, clear and full colour display, the all new Haltech iC-7 Display Dash le...